- Aheadset preload adjusting bolt

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Stainless steel pedal washers - Sold in pairs

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers. - Head Type: Socket Head Cap - Drive Type: Hex Socket - Thread Size: M5x0.8mm - Length Under Head: 10mm - Material: Stainless Steel - Hex Key Size: 4mm - Bag of 5

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5

Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- QR adapter washer for the Surly Tuggnut/Hurdy/Snuggnut

Giant's Derailleur Cable And Housing Set contains all the parts you need to get your bike's shifting back on track. The galvanized cable is double-ended for use with Campagnolo or Shimano/SRAM drivetrains. The full-length housing includes all necessary aluminum ferrules.

Giant's Slick brake cable is pre-stretched for high responsiveness. This galvanized cable is double ended for use with road and mountain bikes and is compatible with almost all brakes.

Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

- Color: Black - Length: 8.5 mm - Material: Steel - Type: Hex - Includes: 4 bolts & 4 nuts

Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb

- Low profile - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Knurl-lock washer system

Giant's Brake Cable And Housing Set contains everything you need to get your braking power back. The galvanized cable is double-ended for use with road and mountain bikes and is compatible with almost all brakes. The full-length housing includes all necessary aluminum ferrules.

The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters