Lighting

We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. Mako 250 - Low cost, high powered light - Highly visible in traffic = keeps you safe - Run Time: 7:00 – 28:00 hours - 3 light settings—High, Low, and Flash - Tough durable design - Water / Dust Resistant IP64 Rated CherryBomb 100 - Daylight Visible Flash (DVF) - Up to 136 hour run time - Visible up to 1 mile - Internal reflector = visible if light in off mode - Easy to operate AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - Water / Dust Resistant IP64 Rated

Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

Engineered to be seen day and night, the incredible sleek Hotrod™ Front 110 emits a powerful 110 lumens of wide beam brilliance. Its continuous array of white LEDs penetrate broad daylight and the dark roads at night with powerful flashes and an extra-wide radiant glow. Every bit the road cyclist’s light, it uses a low-profile flexible mount designed for most handlebars including aerobars. - Powerful 110 lumen white light with 6 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (High - Low - SteadyPulse® - Low Flash - DayLightning® - Zoom) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Ultra low profile, water-resistant design only weighs 29 grams - Versatite™ flexible mount conveniently attaches to most handlebars including aero bars RUN TIMES: - Low Steady: 100 hrs - High Steady: 1:30 hrs - Low Flash: 30 hrs - DayLightning®: 3:30 hrs - SteadyPulse®: 6 hrs - Zoom: 6 hrs - CHARGE TIME: 3 hrs - MOUNTING: Flexible mount for seat post/seat stay - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 29g *Features and specs are subject to change without notice.

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

350 lumens packed into an unbelievably compact form, the all-new Hypershot 350 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 350 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 350 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

AMPP400 Safety first, the AMPP 400 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. Viz 150—Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. - Rechargeable headlight (400 lm) - Wide beam with OptiCube lens technology - Excellent side visibility - Low battery indicator (Illuminates in red with less than 20% battery remaining) - USB rechargeable (Micro-USB cable included) - Mode memory function - Four light modes (High / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket - Improved release button has made it easy to remove the light unit from the bracket - Helmet mount and center fork bracket (optional) Run Times - High (400 lm): 2 hours - Low (200 lm): 4 hours - Daytime Hyper-Constant (400/200 lm): 6 hours - Flashing (200 lm): 60 hours ViZ150 Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. Run Times - Constant (20 lm): 5 hours - Flashing (15 lm): 70 hours - Group Ride (50 lm): 11 hours - Daytime Hyperflash (150 lm): 15 hours

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

If you’re looking for a compact urban bike light combo set at a great price, look no farther than this pairing. We’ve teamed up the compact 80 lumen Beamer 80 headlight with the bright and super-efficient Blinky 3 tail light. Both front and rear lights boast generous run times and have all the steady and flashing modes you need to be noticed as you explore by bike after dark. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Blinky 3 specs: - 3 - 5mm LEDs adn built-in parabolic lensing provide steady and flashing modes - FL1 tested Run times: 70 hrs (steady – 12 lm), and up to 140 hrs (flash - 12lm) - Provide 140° of visibility - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts plus rear clip for multiple mounting options - 68 grams

X6 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware

The Grid 2'fer is a high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL - 1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

The Dayblazer 550's high-power BLITZ daytime running mode and side visibility to grab the attention of cars or light your way through a dark section of the commute. The Grid Rear Light has a wide COB light array and a long run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. The Dayblazer 550 and Grid Rear Light Set offers plenty of rechargeable power to keep you visible while out riding and well-powered to be seen. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE-Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

The Planet Bike Current 500 front white head light is designed to illuminate the path ahead whenever you hop on your electric bike. Whether you’re upgrading the light that came spec’d on your E-bike or adding a front light, the Current 500 is a great choice. The OSRAM LED delivers 500 lumens and the precision fish eye Clean Beam lensing creates a horizontal cut-off beam that won’t blind oncoming cyclists and path users. The sleek, rugged and compact form is constructed of aluminum alloy and mounts neatly to your bike’s fork crown. The mounting bracket’s dual pivot points let you fine tune the beam to ideally project light for a safe ride day or night. The Current 500 includes a Bosch system plug for clean installation into the front light outlet on your Bosch-powered E-bike. Don’t worry if you ride an electric bike powered by Shimano, Toshiba, Stromer and other motor systems because the Current power cable can be modified to work with most systems. Great optics, abundant lumen output and clean design make Planet Bike's Current 500 a smart choice for E-bike cyclists. Be safer and brighter on the path without blinding your fellow riders! PRECISION BEAM Osram High output LED provides steady 500 lumens with clean beam cutoff lens PLUGS INTO BOSCH DC 6-15V BATTERY Easily plugs into Bosch batteries. Can be modified to fit Toshiba and Shimano batteries. MULTI PIVOT INSTALLATION Get the light where you want it with two pivot point bracket - OSRAM KW H2L531.TE LED provides a 500 lumen high power beam - FL1 Tested - Steady mode (500 lm) - Provides 240 degrees of visibility for daytime traffic and provides optimal lighting for nighttime riding - Clean Beam Design - Precision Clean Beam cut-off lens is designed with your fellow riders in mind. Provides for courteous, anti-glare illumination on the ground ahead of you and not into the eyes of oncoming riders. - Front Fork Crown Mounted - Securely mounts to your E- bike's fork crown with mounting bracket with two robust pivot points that allow for beam angle adjustability. - Water resistantance rated to IPX6 standard - Electric Bike Compatible - Includes a Bosch E-bike system plug for clean installation to Bosch-powered electric bikes. A certified mechanic is recommend for installation on other systems. - Compatible with any 6V-15V e-bike system - Cable length is 56" - 116 grams

The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

The City Rover is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance to the front and side for up to 20 hours of ride time. The City Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. - Additional 15 minutes in low-power safety mode after low-battery indicator light comes on - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - 5 Modes (burn time): Steady High 700 Lumens 2 hours, Steady Medium 350 Lumens 4 hours, Steady Low 200 - Lumens 8 hours, Pulse 600 Lumens 16 hours, Daytime Flash 600 Lumens 36 hours

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"

Lezyne's Femto Drive Pair are compact, bright, and beautifully made front and rear safety lights. The Femto Front is an ultra-compact safety light with integrated lens On/Off switch. Durable machined aluminum construction. Side Visibility lens extends beyond body to provide 180 degrees of visibility. Two replaceable CR2032 batteries power one bright LED. Up to 15 lumens with two output/flash options. Available in seven unique anodized colors. Versatile 2-in-1 Clip-On System straps to bars or clips to loops. The Femto Rear mirrors the design of the Femto Rear, but puts out up to 7 lumens of red light with two output/flash modes.

Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights