Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

Park Tool Replacement Chain Tool Pin (2-Pack)
$3.90
Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.
Park Tool Emergency Tire Boot
$3.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Prestacycle CR/V Bicycle Bit Five Piece Set
$3.95
Hardened CRV steel bits. 3mm, 4mm & 5mm HEX sizes, T20 & T25 TORX 1/4" bit sizes. Also perfect for most brands of torque wrenches with the optional adapter below.
Prestacycle Prestaflator Rebuild Kit
$3.95
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.
Ritchey Liquid Torque
$3.95
Ritchey's Liquid Torque creates extra friction between 2 surfaces, reducing tightening torque required to avoid slippage. - Creates extra friction between two surfaces, allowing tightening torque to be reduced by up to 30% - Particularly useful when over-clamping can damage sensitive components such as carbon bars or steerer tubes - Approved for use with carbon, steel, alloy and titanium surfaces - Use with Ritchey Torqkey to ensure safe installation of Ritchey bars and stems
Adams Trail-A-Bike Hitch Snap Pin With Nut
$3.99
• QR Locking Hitch Pin for Adams Trail-A-Bikes
Lezyne GPS O-Ring Set
$3.99
Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size
MSW Glueless Patch Kit
$3.99
Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included
SKS Rubber Straps for RacebladePro and S-Board
$3.99
Replacement SKS Rubber Straps for RacebladePro and S-Board
Sigma Sport Replacement Spoke Magnet
$3.99
Sigma's replacement spoke magnet fits standard spokes and works with Sigma speed sensors.
TYR Soft Silicone Ear Plugs
$3.99
TYR's Soft Silicone Ear Plugs mold easily to your ears for a comfortable, watertight seal. A storage case is also included to keep your ear plugs clean.
Avid Elixir Pad Spreader Tool
$4.00
Brake pad spreader tool for Avid Elixir brakes.
Giant Numen Taillight Seatpost Mount
$4.00
- Replacement taillight mount for Numen lights
Jandd Reflector Mount
$4.00
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
Planet Bike Hardcore Fender Hardware Kit (35mm)
$4.00
- Compatible with Hardcore fenders - 700c x 35mm - Contains 35mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Planet Bike Hardcore Fender Hardware Kit (45mm)
$4.00
Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Planet Bike Hardcore Fender Hardware Kit (60mm)
$4.00
Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
RockShox Suspension Oil
$4.00 - $24.95
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
Serfas Tire Levers
$4.00
Don't leave home without Serfas' Tire Levers. This set of three high-density nylon levers comes with built-in spoke hooks for ease of tire removal. At only 30 grams, you'll only notice they're there when you need them!
SKS EVA Pump Head Grommets
$4.25
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
Park Tool Chainring Nut Wrench
$4.49
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
TYR Anti-Fog Spray
$4.50
A must for any swimmer, TYR's Anti-Fog Spray keeps your goggles and glasses clean and prevents them from fogging.
Blackburn Airstik SL Clip & Strap
$4.95
Keep your Airstik SL Mini-Pump where it belongs...on your bike!
OnGuard Akita Cable (53cm x 5mm/1.72 feet x 0.20 inch)
$4.95
Fear no bike commute with OnGuard's saddle and accessory tether. A sturdy steel cable with permanently fastened loops at either end provides a high degree of security for your bike. 5mm thick, flexible steel cable is tough as nails, and a vinyl coating protects your bike's paint from scratches.
Park Tool Gear Clean Brush
$4.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool Head Seal Kit
$4.95
Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors
Park Tool Shop Screwdriver
$4.95 - $5.49
Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.
Prestacycle Urethane Elastomer Presta Head Gasket
$4.95 - $5.95
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Finish Line Anti-Seize Assembly Lubricant
$4.99
Titanium is a super-light, exceptionally strong material that's great for bicycle frames and components, yet it requires a little special care for the best results. To stop cold-welding, galling or seizing of titanium components and fasteners, Finish Line offers Anti-Seize Assembly Lubricant. It's a premium blend of synthetic oils, graphite, bronze, copper and aluminum complex and works great as a conventional anti-seize for aluminum, stainless steel, and other specialty metals, too. - Works on all metals, but highly recommended when attaching reactive metals like titanium, aluminum, stainless steel and specialty alloys and magnesium - Prevents cold-welding, galling, and seizing of metal to metal contact parts, especially those subject to high torque and moist conditions such as bolt threads, seat posts, pedals and bottom brackets - 3-Pack of 6.5cc Sachets
FuelBelt Fuel Loops
$4.99
- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts